ENVIRO+ 5W-20 is a premium, full synthetic, SAE 5W-20 engine oil. It uses an advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* HYBRID+ additive technology suitable for petrol/electric vehicles offering superior protection against colder engine operating temperatures, frequent stop/starting, water condensation and fuel dilution.
ENVIRO+ 5W-20 meets API SN and the latest ACEA C5 specifications.
Application
ENVIRO+ 5W-20 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission engines, including Petrol & Diesel hybrids.
Itmay be used where SAE 5W-20 or SAE 0W-20 grade, low viscosity, fuel efficient engine oils are specified by the manufacturer. It can be used where ACEA C5, ACEA A1/B1 (obsolete), API SN, SM or ILSAC GF-5/GF-4 grade oils are specified.
Suitable for hybrid engines in Toyota/Lexus and Honda as well as other manufacturers using this technology. It is also suitable for use where Volvo VCC RB S0-2AE and Jaguar/Land Rover STJLR.51.5122 is specified.
Enviro+ 5W-20 should not be used where normally higher viscosity engine oil is recommended by the manufacturer.
Designed for use with flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is the primary choice of lubrication for late model vehicles that are running ethanol blend fuels. It is also suitable for late model vehicles with dedicated LPG systems including those with direct injection LPI. It is also suitable for use in Hybrid petrol/electric vehicles requiring this viscosity grade and specification
Vehicle and Fuel Types
Suitable for use in passenger cars, 4WD’s & light commercial vehicles. It is NOT recommended for use in motorcycles. It can be used with Petrol, E10/E85 for everyday use, LPG (Dual Fuel & LPi Liquid Phase Injection) and light duty diesel engines with / without a DPF.
Important Maintenance Information
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
Please Note: A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. https://penriteoil.com.au/products/58mm-plastic-tap
*Low SAPS oils may sometimes be referred to as Low Ash oils
Part No:
EPLUS5W20005
Cross Reference Part Nos: